Displacement Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.77 – €8.27 net (excluding VAT)
For file: DisplacementSensor_v3 - FlexureFrame_BuiltInBlade_0.2mm_PETG_MK3S_8h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.52 excluding VAT (range midpoint).
- Weight reported by the author
- 78 g
- Print time reported by the author
- 8.54 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Measure <10 microns for <$10
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 84
- Makes
- 0
- Views
- 508
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
Analog displacement sensor, measure under 10 microns for under $10! Measurement range of between 0.5mm and 1.0mm (depending on how careful ya are during the build) and a repeatability of around +/- 5 microns. I made it for an application where I was measuring spindle runout with a dial indicator, but wanted to be able to record data to the computer. It's more than a tiny bit larger than the indicator, but I'm quite happy with the performance!
If you'd like full details on the design, build, and calibration, you can find them here.
I printed mine from PETG, with 0.2 layers on a 0.4 nozzle and 50% infill. I went with high infill to try to give the outer frame as much stiffness as is reasonable.