1 / 3
Ruixin Pro knife sharpener pivot for 8mm rods and M4 tightening screw | Ruixin Pro Messerschärfer Kugelgelenk für 8mm Stangen und M4 Feststellschraube — image 1
1 / 3

Ruixin Pro knife sharpener pivot for 8mm rods and M4 tightening screw | Ruixin Pro Messerschärfer Kugelgelenk für 8mm Stangen und M4 Feststellschraube

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Pivot for a Ruixin Pro knife sharpener with 8mm rods | Kugelgelenk für einen Ruixin Pro Messerschärfer mit 8mm Stangen

Rating
0 / 5
Likes
22
Downloads
57
Makes
0
Views
1,433
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a pivot remix for a Ruixin Pro knife sharpener with 8mm rods and an M4 screw fastening with recessed nut. With the original I had the problem that the melt-in thread was pressed out when tightening.

Print the parts in STL orientation with 0.15mm layer height, 3 perimeters, 25% infill (Gyriod) and without support. Glue the holders together with superglue or similar.

 

--- German description ---

Das ist ein Kugelgelenk Remix für einen Ruixin Pro Messerschärfer mit 8mm Stangen und einer M4 Schraubenbefestigung mit eingelassener Mutter. Beim Original hatte ich das Problem, dass das Einschmelzgewinde beim Festspannen herausgepresst wurde.

Druckt die Teile in STL Ausrichtung mit 0.15mm Schichthöhe, 3 Außenwänden, 25% Infill (Gyriod) und ohne Support. Klebt die Halter mit Sekundenkleber o.ä. zusammen.

Tags