1 / 6
Magic Container - Multiboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nice container for the Multiboard system
- Rating
- 4.875 / 5
- Likes
- 107
- Downloads
- 531
- Makes
- 9
- Views
- 2,459
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A nice container that can be added to a multi-board system to hold anything. https://www.multiboard.io/
Sizes
The size of the containers is described with “units” with 1 unit equaling 35mm
- 1x2 = 35mm*70mm
- 2x2 = 70mm*70mm
(All the containers have the same height, 7mm as of now)
Slicing recommendation
You should print the box with 3-4 perimeters to strengthen the holding mechanism. It will not add much plastic as the walls are thin anyway.
What else to print
It holds to the multiboard using 2 MultiConnect connectors so please print those as well.
Thanks to David D for the amazing MultiConnect connector.