1 / 4
DIY 100w LED COB video light / spotlight
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is non-dimmable DIY LED video light with 100w 4500k COB, bowens mount, all 3d-printed.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 65
- Makes
- 0
- Views
- 1,660
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This light needs articulated mount to be mounted on a light stand – https://www.prusaprinters.org/prints/75428-articulated-mount-for-light-stand-bracket
All of the details in a blog post – https://flamy.ca/blog/2021-09-12-2021-09-12-3d-printed-diy-led-light..html
BOM
Hardware
- 4x M8 40mm bolts
- 4x M8 nuts
- 2x M3 10mm bolts for mounting handle
- 2x M3 30mm bolts for 12v power module
- 2x M3 35/40mm bolts for led driver
- 4x M3 nuts for holders of power modules
- 2x M5 14/16mm bolts for attaching articulater mount
- 2x M5 nuts for attaching articulated mount
Electrical
- 1x 100W LED COB
- 1x 100W LED COB driver (I got 40W one by mistake)
- 1x 100W LED Aluminium heat sink with 80mm fan and 60 degree 44mm lens, with bolts for mounting lens and light COB.
- 2x Latching toggle switch
- 1x 12v DC power supply (I sacrificed a 12V 1A wall wart from a long-dead external hard drive)
- 1x 5x7 Prototyping board
- 3x JST 2-pin male connector
- 3x JST 2-pin female connector
- 1x 2-wire extension cord
- 2x 3-contact wago connector
Project page
https://github.com/avolkov/openscad-designs/tree/master/video-light