Sweetheart Phone Stand with cutout and inlays V2 (No supports!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lovely Valentine's Day phone stand for your sweetheart with a Voronoi style cutout and heart inlays
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 80
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Expand your horizons, and your phone stand collection. View (and print) the sturdy 4mm thick Sweetheart Phone Stand for the one you love. It includes a Voronoi style cutout on the back side and inlaid decorative hearts on the front. It is thick enough to print with PLA and not have issues.
Tip: Take it to the next level and emboss/deboss the model using your slicer to add custom text!
Update: I heard everyone's comments on a similar design and I have changed this design to now be significantly easy to print.
Printing tips (in other words, I had success with):
- I recommend printing on its side.
- 0.20mm layer height
- 6 wall loops recommended
- Supports are not required
- You shouldn't need a brim, but you know your printer better and may choose to use mouse ears at the corners.
- If you choose to print the legacy version, print on its back with 6 wall loops and organic supports, including supporting the base which goes into the air while printing and requires supports despite what your slicer says (most failures are due to this).
- I used Elegoo PLA on a Neptune 4 Plus