1 / 3
Sweetheart Phone Stand with cutout and inlays V2 (No supports!) — zdjęcie 1
1 / 3

Sweetheart Phone Stand with cutout and inlays V2 (No supports!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A lovely Valentine's Day phone stand for your sweetheart with a Voronoi style cutout and heart inlays

Ocena
0 / 5
Polubienia
11
Pobrania
80
Wydruki
0
Wyświetlenia
303
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

Expand your horizons, and your phone stand collection. View (and print) the sturdy 4mm thick Sweetheart Phone Stand for the one you love. It includes a Voronoi style cutout on the back side and inlaid decorative hearts on the front. It is thick enough to print with PLA and not have issues.

Tip: Take it to the next level and emboss/deboss the model using your slicer to add custom text!

Update: I heard everyone's comments on a similar design and I have changed this design to now be significantly easy to print.

Printing tips (in other words, I had success with):

  • I recommend printing on its side.
  • 0.20mm layer height
  • 6 wall loops recommended
  • Supports are not required
  • You shouldn't need a brim, but you know your printer better and may choose to use mouse ears at the corners.
  • If you choose to print the legacy version, print on its back with 6 wall loops and organic supports, including supporting the base which goes into the air while printing and requires supports despite what your slicer says (most failures are due to this).
  • I used Elegoo PLA on a Neptune 4 Plus

Tagi