1 / 7
Desk Top Shelf Brackets for 1x10 or Larger Boards — image 1
1 / 7

Desk Top Shelf Brackets for 1x10 or Larger Boards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Shelf brackets for building your own desktop shelf, for 10" or wider shelf boards. 256mm x 256mm build area required.

Rating
5 / 5
Likes
101
Downloads
354
Makes
2
Views
1,793
Reviews
2

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial

Brackets for building a DIY shelf out of a 1x10 or similar shelf board.  Designed for X1C print bed (256mm * 256mm).

*please note the slicer modifiers to make the bracket/screw part much strong

I wanted a shelf that could specifically hold my vintage gaming consoles, while also letting my 5 1/4" floppy disk storage boxes slide underneath.  The available space on my desk was 24".  The local home depot near me sells 24" long by 10" deep shelf boards for under $10.

This is the largest bracket I could fit on an X1C print bed (256mm x 256mm).  It is overkill at 175g per bracket.  I used $10 rolls of eSun ABS I got on sale (10 for $10).  I printed with the following settings (see photos):

  • Material:  eSun black ABS
  • Layer height:  0.28mm draft
  • Infill: 15% gyroid (Modified the “brackets” portion to print at 25% infill)*
  • Perimeter walls: 2 (Modified the “brackets” portion to print at 5 walls)*
  • Supports:  No
  • Brim:  Yes Yes Yes - as much as you can add - warpage is worse on large boxey prints like this.  Any tricks you normally use to get prints to stay on the plate, use those tricks.

To assemble you need:

  • Qty 1 shelf board - I used “Chestnut Laminated Wood Shelf 10 in. D x 24 in. L (0.63" deep)”
  • Qty 4 - #10 x ¾" wood screws (My board was 0.63" deep; for thicker boards use longer screws)  Drill a 1/8" pilot hole.
  • Qty 2 - Printed shelf brackets (175g of filament per bracket in my case)
  • (Optional) Qty 2 - Printed accent color inserts

This was my first ever Fusion 360 model.  Uses too much filament, but is sturdier than comparable cheap particleboard shelves from big box stores when using a quality piece of sheld board.  Better than nothing!  Cost to me:  340g filament at $10/kg, $9 for the shelf board, $4 for the screws.  If you have screws and wood laying around, cost to you can be much cheaper!

Revisions:

V1 - Initial release

Tags