1 / 1
Sabatons for fysetc MGN9 hollow rail — image 1

Sabatons for fysetc MGN9 hollow rail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you want more mounting points for your fysetc hollow rail, you're in the right place.

Rating
0 / 5
Likes
5
Downloads
15
Makes
0
Views
315
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

These hollow rails are an interesting concept. They are made by fysec, and currently the sizes that I want are not stocked, so I cut a longer rail down with an angle grinder (then tidied up on a bench grinder). The weight saving is substantial. However, the two sizes I wanted both result in an uneven pattern of holes, with the endmost hole “open” and not having a mounting point for an M3 screw.

These sabatons work around this limitation. You glue these things in under the rail, in the obvious-fitting places. There's a just-over-half-size sabaton in case you cut the rail right in the middle of one of these slots.

Glue them underneath the rail anywhere you want to create an M3 mounting point. Use a quality 24 hour epoxy like Araldite, mix it well and ensure it is cured properly before putting any load on the new mounting points.

Tags