1 / 5
Shaun - Toilet Paper Sheep [MINI compatible]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix/remodeling of the Black Sheep Toilet Paper Holder from user luczjanoo. Fits on the PRUSA MINI.
- Rating
- 4.909 / 5
- Likes
- 174
- Downloads
- 600
- Makes
- 16
- Views
- 5,122
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Intro
After i first saw this model i knew i had to have it in my bathroom!
Looks so awesome and its a nice eye catcher, because you look right at it when you enter the bathroom.
Regarding the design i was not 100% happy and limited by my MINI´s smaller build plate so i took some measurments, started up Fusion and did some redesign to little Shaun.
Leave some comments if you like it and have a good time printing!
Features / Things i changed:
- Body
- Redesigned the body to be printed in four parts and glued together
- Removed the back wall because i didn´t find it to be necessary
- the Body itself is a bit thinner than the original to save some extra filament
- Legs / Feet
- New feet design
- Legs are made from reused plastic rods (outer 18 mm/ inner 15 mm) and can be pluged and/or glued into the feet and body
- Legs can also be modeled in Prusa Slicer with a cylinder and be adapted to the hight you want
- Diameter 18 mm / Length 130 mm
- Head
- splitted the eyes from the body so it can be printed separately and then glued together
- print file for the eyes has a color-swap after 5 layers to change from white to black filament
How i did it:
- Remodeled the sheeps body based on the measurements i took from some toilet paper rolls (Diameter 130 mm / Width 100 mm)
- Cutted the body with 90° profiles to make a nice corner for gluing
- designed new feet, integrated the legs and imported the head
Printing instructions:
- General:
- PLA
- 0,6 mm Nozzle
- 0,3 mm Layer Hight
- Eyes, head, feet and legs (if you decide to print them) need no supports
- the Body is seperated in four parts and i recommend brim and supports for the mounting points of the legs
- the color swap on the eyes is done with the standard M600 command
Tools/Materials used:
- Fusion 360
- a good old caliper
- super glue (cyanoacrylate)
- Filament:
- DAS FILAMENT - 1,75 mm PLA - matt black
- DAS FILAMENT - 1,75 mm PLA - matt white
- plastic rod (Diameter 18 mm / Length 130 mm) (optional)