PSU Mount for Creality CR-10
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This PSU mount attaches directly to the 2020 extrusion profiles of the Creality CR-10. It holds the original PSU…
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 204
- Makes
- 0
- Views
- 1,463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This PSU mount attaches directly to the 2020 extrusion profiles of the Creality CR-10. It holds the original PSU coming with the CR-10, if you want to convert the classic CR-10 into a boxless version (similar to the Ender 3). The mains voltage section of the PSU is seperated from the output voltages and contains no screws/screwholes.
IMPORTANT NOTICE:
THIS MOD IS ONLY RECOMMENDED FOR EXPERIENCED USERS! WORKING ON THE MAINS VOLTAGE SIDE OF THE POWER SUPPLY UNIT IS REQUIRED!
Parts needed:
- 5x M3x10 hex socket screw
- 5x M3 T-Slot nut for 2020 extrusion profiles
- 2x M3x6x5 threaded inserts (use of a soldering iron required)
- 2x original hex socket screw (mains supply socket)
- 3x original hex socket screw (PSU mounting screws)
- 1x original mains supply socket
- 1x original mains switch
Print Settings
Printer:
Generic Printer
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm / 0.3 mm
Infill:
25%
Filament:
Generic PETG PETG
Notes:
PETG is recommended, as this is a critical mechanical part. Support is needed for the openings. Automatic support can be difficult to remove, you can use the second STL-file as support geometry.
Post-Printing
Threaded inserts
Use a soldering iron (~200 °C) to press the threaded inserts into the back of the mount.
Assembly
It is recommended to mount the holder first to the extrusion profiles in the back of the CR-10 (after inserting the PSU you can't reach the mounting screws anymore). If you have a second Z-Motor, be careful to route the wires first. Clear the screw holes with a drill.