Toilet Fix for older toilets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The plastic hook part that holds the flapper in place on an old toilet bowl tank broke so I made a replacement.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
I needed to make an old toilet last just a bit longer lol. The plastic part that is screwed to the bottom of the tank that holds the flapper in place broke and I couldn't find a part that fit close by so decided to design my own. Its not the wheel but it works like a charm. I printed in PLA and then gave it a thin coating of UV resign to make it a littler more waterproof and stronger.
Prints with no supports. Print one main fix and 2 pins. May need a tiny bit of sanding for pins as snug fit but do fit in holes and glue in. Make sure to use washers etc as required. I have a washer both under and on top and have no leaking problems so far.