VESA Adjustable Riser
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.58 – €0.70 net (excluding VAT)
For file: Screw Distancers_0.4n_0.2mm_PETG_MK4IS_37m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.64 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 37.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adjustable VESA riser for monitors that allows you to rise or lower your monitor up to 75mm.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 300
- Makes
- 2
- Views
- 2,058
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adjustable VESA riser for monitors that allows you to rise or lower your monitor up to 75mm. Convenient for wall-mounted monitor stands that do not have height adjustment.
Depending on your monitor model and the way how the cables are plugged in it, you might need to use the screw distancers that will move the riser away from the monitor, in order to allow access to the connectors.
Printing the Riser
Use the 3MF PrusaSlicer project, as it contains all the print settings, together with reinforced parts.
- Recommended material: PETG.
- Layer height: 0.2mm
- Infill: 20% gyroid
- Reinforcements: 100% infill (around the screw holes and the side rails where the nuts sit - see photo below, and the enclosed 3MF project)
- No supports, no brim (print as oriented)
Required material
a) If no screw distancers are required
- Printed parts
- VESA Adjustable Riser - 1pcs
- For connecting the riser to the monitor
- M4 x 8mm (or 10mm) lens-head Phillips screw - 4pcs
- For connecting the VESA mount to the riser
- M4 lens-head screws (from your current VESA mount) - 4pcs
- M4 hex nuts - 4pcs
b) If screw distancers are required
- Printed parts
- VESA Adjustable Riser - 1pcs
- Screw Distancers - 4pcs (1 set) - should be placed onto the 50mm screws between the riser and the monitor
- For connecting the riser to the monitor (use 75x75mm holes)
- M4 x 50mm lens-head Phillips screw - 4pcs
- For connecting the VESA mount to the riser (use 100x100mm holes)
- M4 lens-head screws (from your current VESA mount) - 4pcs
- M4 hex nuts - 4pcs