1 / 1
MONSTER M4SK Lens Mount Alignment Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an alignment jig for gluing in the lens mounts I designed for the Adafruit MONSTER M4SK.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an alignment jig for gluing in the lens mounts I designed for the Adafruit MONSTER M4SK into a DreamVision Creations Large Predator Bird Mask.
Your application may vary, but this is a reasonable example of the tooling you could create to make sure your eye frames are set correctly relative to each other (as setting them individually could easily end with misalignment that will make your mask cross-eyed or wall-eyed).
You will need the nutsnbolts OpenSCAD library from JohK to compile.