1 / 5
Epson L8050 Refill helper for L8050 and CUYI (Sublimation) ink bottles — image 1
1 / 5

Epson L8050 Refill helper for L8050 and CUYI (Sublimation) ink bottles

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I was surprised this worked well, absolutely no spills and hands without ink.

Rating
0 / 5
Likes
14
Downloads
154
Makes
0
Views
814
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

For refilling Epson L8050 (and probably other printers with a 6mm filling sprout) with CUYI sublimation ink. No drips, no ink on the hands. The silicone sprout of the ink bottles fits snugly.

Printed on a well-tuned Bambu Lab X1C.
Torwell PETG
Layer height 0.16mm (adaptive)
try to avoid infill by increasing wall loops. (4)
Support, I used manual support. 

How to use, first put the printed part over the sprout of the printer and then pop in the bottle.
gently squeeze the bottle to the desired level in the ink tank.
Have some kitchen towels ready for cleaning if there is any spill.
I was able to fill the 6 tanks without any drop spilled or ink on my hands. I use the blue one for Light Cyan and Cyan and the red one for Light magenta and magenta. I suggest to use 4 sprouts but it's not necessary if you clean them out with water and IPA after use.

Tags