ø22mm Button/Indicator Label Carrier
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.15 – €0.18 net (excluding VAT)
For file: 22mmLabelCarrier_0.2mm_PETG_MINI_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 10.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Label Carrier (25x9mm) for ø22mm Devices typically used in Control Panels.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 43
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
About
This is a label carrier/holder for devices that are mounted in ø22mm holes. This includes buttons, switches, pilot lights, and other indicators. Such devices are usually found in the front cover of a control panel.
This carrier is designed for labels that are 25x9mm in size.
This label carrier is not watertight and thus might degrade the IP rating of your control panel.
Details
Recommended Printing Parameters
| Orientation | Print in the provided orientation of the STL file |
|---|---|
| Support Material | Print without support material |
| Layer Height | 0.2 mm |
| Nozzle Diameter | 0.4 mm |
| Material | PETG |