FLSUN V400 FILAMENT SPOOL HOLDER
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder upgrade for the FLSUN V400
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 88
- Makes
- 0
- Views
- 500
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I made my own spool holder, because I did not prefered the factory flat one.
1st step:
Screw out the factory top filament spool holder and push on the "Base" model onto it. I made a hole on it to get easily screw with the factory allen tools.
2nd step:
After you screw back the top, slide onto the "Outside" part to the base.
3rd step:
Clip on the holder ring onto it
4th step: Enyjoy :)
I added a bigger diameter clip too, if you worried that the filament will fall down you could use that also.
---------------------------------------
3D PRINTING SETTINGS
---------------------------------------
To print the base without any support, print it face down as the cura photo shows.
0.2 mm layer height
no supports
I printed in 350mms with the V400 without any problem.