1 / 3
Milwaukee M12 Battery to Dewalt 12v Tool Adapter — image 1
1 / 3

Milwaukee M12 Battery to Dewalt 12v Tool Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Can be used to run Dewalt 12v tools from Milwaukee M12 battery.

Rating
0 / 5
Likes
28
Downloads
155
Makes
0
Views
1,702
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Can be used to run Dewalt 12v tools from Milwaukee M12 battery.

To assemble you need to solder some wires and crimp some spade connectors. 

Use Large 6.3mm spade connectors for the Milwaukee battery side 

Use small 4.8mm female spade connectors for the dewalt side.

 

Note that in the picture I had the female spades misaligned for the Dewalt side, but I didn't want to print a new one so I just butchered the existing connectors into submission.

Model should be corrected for this mistake.

 

I used a soldering iron to meld the male spades into place. I used CA glue to glue the female dewalt side in place.

 

Notice that I use only the battery positive and negative terminals, other terminals are not used; if your tool uses those you'll need to adapt/butcher it I guess.

 

Prints fine with arachne and 0.6mm nozzle in current prusaslicer  version with input shaping.

Tags