Milwaukee M12 Battery to Dewalt 12v Tool Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be used to run Dewalt 12v tools from Milwaukee M12 battery.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Can be used to run Dewalt 12v tools from Milwaukee M12 battery.
To assemble you need to solder some wires and crimp some spade connectors.
Use Large 6.3mm spade connectors for the Milwaukee battery side
Use small 4.8mm female spade connectors for the dewalt side.
Note that in the picture I had the female spades misaligned for the Dewalt side, but I didn't want to print a new one so I just butchered the existing connectors into submission.
Model should be corrected for this mistake.
I used a soldering iron to meld the male spades into place. I used CA glue to glue the female dewalt side in place.
Notice that I use only the battery positive and negative terminals, other terminals are not used; if your tool uses those you'll need to adapt/butcher it I guess.
Prints fine with arachne and 0.6mm nozzle in current prusaslicer version with input shaping.