Scho-Ka-Kola Revo Nozzle Container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Revo nozzle holder you can put into an empty Scho-Ka-Kola chocolate tin. Holds 8 nozzles.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This holder fits into a Scho-Ka-Kola tin and will firmly* keep 8 E3D Revo nozzles. The holder can be removed after installing, but will not fall out on its own.
No print recommendations. Do whatever you feel is right. The model in the picture was printed with a 0.4mm nozzle, 0.2mm layer height and 20% infill. Printing time using aforementioned settings will be approximately 1 hour and 30 minutes.
*fitment of the nozzle seats is dependent on printer accuracy and print settings such as layer height. This model is meant to keep the nozzles in place and not hold them loosely like some other nozzle holders.