DHT22 sensor board mount for the Prusa MINI+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple mount for a DHT22 sensor board on the extruded profile of the Prusa MINI+
- Rating
- 4 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 1
- Views
- 397
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a simple mount that can be attached to one of the extruded profiles on the Prusa MINI+ (and possibly other extruded profiles that match its dimensions).
It is designed to fit a DHT22 module such as the one found here: https://www.aliexpress.com/item/32802908424.html. If the link is not valid anymore, have a look at the pictures for reference. Once the mount is in position (inserted and rotated 90°), the friction fit should make it fairly stable.
There is a little lip around the mount to allow some space for some of the components on the board that may protrude on the underside of the sensor board. The holes are slightly undersizes and can accept M3 screws.