Easdry spool roller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easdry spool roller holder
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 1
- Views
- 388
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hold the spool on bearing and is easier to put in.
Added a small file with the wall thinner, Overture cardboard filament spool were a little too snug
I recommend using the easdryRollerSmall file since it is the smallest and there is not a lot a spare space in a easdry. But the other one is stronger and bigger so depending on the kind of spool you are using you have options.
Use 8x F688ZZ bearings and no screw.
Printed out of ABS but PETG should be OK, definitely not PLA.
UPDATE 2025-05-20 Fix small alignment error
UPDATE 15/02/25
Remade the small file to make it the smallest possible so that the ELEGOO cardboard spool dont rub against the spool holder and … it didn't work, Elegoo spool just have to be on the spool holder :(. But it will work with eSun, Overture, Polymaker, Giantarm and many other that I have tested.