1 / 3
Spill-Free Toyota Oil Filter Cup Wrench (VASE MODE) — image 1
1 / 3

Spill-Free Toyota Oil Filter Cup Wrench (VASE MODE)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A tool that allows mess-free oil changes! Made for vertically mounted 65mm (outside diameter) spin-on oil filters!

Rating
0 / 5
Likes
16
Downloads
96
Makes
0
Views
1,302
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

PLEASE READ CAREFULLY!

This tool allows you to unscrew your oil filter while it catches any oil that might drain out after the filter is removed. It has an integrated Toyota oil filter wrench with 14 flutes (64.5mm). The tool is designed for 70mm high filters, but I've also designed an extension ring so the tool can be used with taller 85mm filters. These are the two common sizes that I know of.

 

PRINTING:

Print in spiral/vase mode with a big nozzle (recommended 1mm or larger). Make sure you have enough bottom layers, between 1mm to 2mm thickness. Layer height should be between 30% and 50% of the nozzle size. I recommend printing it in ABS/ASA. I'm not sure about chemical resistance to engine oil and other things you might have mixed into it, but the heat resistance of ABS/ASA will help if the oil filter is still hot while you unscrew it. Also, printing in spiral/vase mode pumps a lot of heat into the part, which ABS/ASA can handle a lot better than other plastics. Despite this, you still shouldn't print too fast in spiral/vase mode, as the part can easily start deforming. Keep the speeds reasonable, add some part cooling and you will be fine. Included in the files are the extensions rings that you can use for taller oil filters (it will extend the height by 15mm), you can also print this in spiral/vase mode or alternatively you can scale the tool itself to be taller in the slicer and skip the extension ring.

Provided are several versions for different nozzle sizes. This is necessary to keep the right internal size for the Tetradecagon that interfaces with the oil filter. The number behind the model name signifies the line width. This line width should be 125% of the nozzle diameter for the optimal strength. In slicers like Cura, Bambu Studio and Simplify3D, you have to enter the line/extrusion width in mm, while in Prusaslicer and Superslicer, you can enter this in both mm or % of the nozzle diameter, which would be 125% in our case).

The sizes are:

  • 075 (0,75mm for 0,6mm nozzle)
  • 100 (1mm for 0,8mm nozzle)
  • 125 (1,25mm for 1mm nozzle)
  • 150 (1,5mm for 1,2mm nozzle)
  • 175 (1,75mm for 1,4mm nozzle)

If you prefer to use 120% of the nozzle diameter instead (some slicers default to this), you should be able to do so with the same models without a problem (the tool will hold the oil filter a little less tight). However, if you prefer a model with an exact line width, I will gladly upload it for you, it takes only a minute.

 

USAGE:

I'm assuming you know how to do an oil change, but if you have any questions, feel free to ask! To use this tool effectively you should first break the old filter loose with a dedicated oil filter wrench or your hands if you're strong enough. Oil filters can be stuck on pretty tight and I'm not sure a plastic wrench will be able to provide the necessary torque. After about half a turn the filter should be loose enough for our tool to turn it (No oil should leak out yet at this point). Now you can put on the tool and start unscrewing the filter. Be careful, after the filter comes loose, the tool will be top-heavy. Keep it upright! Now that you have removed the filter from the engine, you can pour the oil out of the cup. The tool is designed to hold the filter inside while you're pouring out the oil. This is to prevent the filter from falling out unexpectedly and splashing oil everywhere. Your tool might not hold the filter very securely, or hold it too tight in stead. Please put a new filter in the tool before trying to remove the old one, so you can feel how it's going to behave without risking spilling old oil everywhere. I've tested this on 3 different Toyotas and the tool held all the oil and the filter neatly. Your car might be different and dump a lot more oil into it. This is a risk you'll have to accept. ALWAYS keep an oil drain pan and plenty of cardboard underneath the engine when you're changing your oil!

 

Good luck!

Tags