1 / 3
Replacement Ball for B. Toys Whacky Ball Toy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement ball for B. Toys Whacky Ball Pound-a-Ball toy
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 55
- Makes
- 0
- Views
- 670
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
We lost one of the balls that came with our B. Toys Whacky Ball pound-a-ball toy. This model is perfectly sized to work as a replacement!
Here's the original toy: Whacky Ball
Printing Tips
- Because 3D printers can't print steep overhangs, the best way to print a sphere is in two halves.
- The .3mf file is cut in half, and includes dowels for lining up the pieces.
- The .3mf includes a 3mm brim on the dowels. (Remove after printing.) No other supports are needed.
- Use super glue (I used Krazy Craft Super Glue) to connect the halves after printing.
- I used 0.15mm layer height on the SPEED setting in Prusa Slicer.
For reference, the sphere diameter that worked best for me is 45.7mm.