Holder for the filament runout sensor on the Sovol SV07
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for the filemant runout sensor which allows to keep the filament spool next to the printer, instead on top of it.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 71
- Makes
- 0
- Views
- 592
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
WARNING: I currently use this setup, but it can cause too much friction, if the spool is on the same height as the printer and the filament has to go up to the sensor an then back down to the print-head.
Be sure you know what you do, if you use this setup.
The height of the Sovol SV07 with the filament spool on top is too high for where I want to put it.
In order to reduce the height, I am using the Spool holder for Prusa MINI Flexible. This got the spool out of the way.
This holder uses the existing filemant runout sensor to route the filemant to the print head from the spool, which sits next to my printer.
When printing, you need to insert a pause right a the layer that closes the opening for the M3 hexnut. When the print is paused, insert the hexnut (make sure it does not stick out) and then continue printing.
Use the existing screw to connect the runout sensor to the holder, the holder just sits on top of the z-axes extrusion (can be mounted left or right).