Cutlery Travel Container
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.54 – €3.10 net (excluding VAT)
For file: cutlery_0.4n_0.2mm_PETG_MINIIS_2h27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.82 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 2.45 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A quick container for bringing your cutlery with you, without putting them in plastic bags. OpenScad file included.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 164
- Makes
- 1
- Views
- 562
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
I wanted a travel case for cutlery and thought it would be useful if there was a version with included the model source so people can easily tweak it.
The included .stls are for a 20x50x200mm internal dimensions case, with a wall thickness of 1.2mm all around.
For your own custom case just tweak the parameters at the top of the file or edit some of the modules to how specific parts are made. To switch between generating the lower or upper part just change the parameter “show_lower” between “true” and “false”.
I printed in petg 2 walls, one at a time to reduce stringing, but it should be fine to print both simultaneously. No supports or brims are needed. At worst you should only need to remove stringing.