1 / 5
Wall Anchor / Furniture Spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two-piece wall anchor that locks in place using a horizontal M3 screw and a M5 screw with a nyloc nut.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 48
- Makes
- 1
- Views
- 575
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a wall anchor bridging ~50mm that may be taken off but is fast to reattach so I came up with this:
The Base is screwed into the wall using a 3.5-4mm countersunk screw. The Spacer is mounted to the furniture piece using a M5 screw and a nyloc nut. Both pieces are screw-fit together and then locked in place using a M3 screw and a regular nut.
Required Material
- M5 Screw (10mm+)
- M5 Nyloc Nut
- M3 Screw (20mm for the thin version, 25mm for the thicker version)
- M3 nut
Print Settings
- PETG, supports for the spacer pins and for the grooves on the base
Assembly
- Insert the M3 nut into the side of the base
- Mount the base to the wall
- Prepare the spacer by inserting the nyloc nut (a screwdriver can help guide the nut). To prevent the nut from falling out, use a M5 screw and screw it on tightly before final assembly. That will force the nut to remain in place. Remove the screw.
- Loosely mount the spacer to the furniture piece
- Attach & rotate the spacer to the base and fix it using the M3 screw
- Tighten the M5 screw securing the furniture piece