1 / 4
no hardware parallel plier
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
parallel pliers all printed
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 166
- Makes
- 0
- Views
- 1,105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
make sure joints are aligned when inserting pins. use a layer height of 0.2 or lower when printing the provided STLs to prevent need to file holes at all
parts quantities:
- 2x toolhead
- 2x limbB
- 1x limbA1
- 1x limbA2
suggested order of assembly:
- place limbB onto each limbA part by central pin
- place toolhead over lower and upper pins on right side of assemblies
- adjust so both assemblies are at same open angle
- push center pin and handle side pins into lower corresponding hole
- push toolhead upper large pins through corresponding hole
- snap handle pins together
- check pins to make sure all large pins completely contain smaller pins
- enjoy :)
if toolheads are misaligned check that center pins are completely mated
model pictured in cover photo: https://www.printables.com/model/740037-adjustable-pcb-holder-tool