1 / 1
Sides handles for Wood Sorting Case (Sortimo T-BOXX compatible)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just some small grip handles for the sides
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 32
- Makes
- 0
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Handles for the Sortimo wood case.
You need three 3x12mm wood screws for 9mm plywood version.
In case you used 12 mm plywood, could even use 3x15mm screws (not tested!).
The file should already be orientated in the correct direction.
This should be printed on the biggest flat side (screw chamfer side)
I printed mine using PLA and 0.2mm layer height.