1 / 3
LACK toolholder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A toolholder for attaching to the side of a table, in my case the LACK table that supports my LACK enclosure.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This toolholder attaches to the side of a tabletop via three 2 mm wood screws from the side. The holes are a little narrower, so the screws can hold on to the plastic well.
The toolholder has space for the following tools:
- Caliper
- adjustable wrench
- two narrow screwdrivers
- all Allen keys that come with the Prusa MK3S+:
- 4 mm
- 3 mm
- 2 x 2.5 mm
- 2 mm
- 1.5 mm
- pliers that come with the Prusa MK3S+
- 3 x SD cards
- 2 x micro SD cards
- 2 x hex nuts up to 13 mm outer diameter
- glue stick
- up to 18 nozzles, or the nozzle box by T-MAN - https://www.printables.com/model/59150-modifier-nozzle-case-remix/comments (remixed from a model by Craftop)
Be aware that it has a little lip extending over the tabletop, which might not fit if you put the upper LACK table directly on the lower one!
I printed it using the 0.25 mm nozzle, but the standard 0.4 mm nozzle should be fine as well.
I attached the .f3d, feel free to edit!