Cap for taphole Campingaz 20L Canister
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.96 – €1.18 net (excluding VAT)
For file: canister_cup_0.15mm_PLA_MK3S_1h14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.07 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.23 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ersatz für den teilweise undichten Zapfhahn an 20L Campingaz-Kanister durch Verschlußkappe
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 173
- Makes
- 2
- Views
- 945
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Da die originalen Wasserhähne der Kanister teilweise undicht waren und das Wasser über einen längeren Zeitraum gespeichert werden muss, habe ich mich entschlossen, einen von Thingiverse heruntergeladenen Druck zu modifizieren: https://www.thingiverse.com/thing:5169637 von Boris_V
Das Original wurde in der Größe/Durchmesser angepaßt und in der Höhe beschnitten. Zwecks Dichtigkeit wurde noch eine Dichtungsscheibe erstellt.
Hatte mit unterschiedlichen PLA Variationen geprobt, vereinzelt empfehlen sich Stützen bei der Kappe.
Material: Kappe PLA / PETG, Dichtung TPU 85A
Drucker: Prusa MKS3+
Rafts: keine
Stützen: keine / auto
Schichthöhe: Cup 0.15, seal 0.2
Infill: Kappe 100% / Dichtung 25%
Filament Marke: Kappe Verbatim PLA / Dichtung 3DFils TPU 85a
Filament Farbe: grün / Gelb
Siehe auch: https://www.printables.com/model/1247949-campingaz-cap-replacement-campingaz-verschlusskapp und
https://www.printables.com/model/1247995-campingaz-canister-spout-v1a and the Showerhead
----------------------------------------------------------------------------------------------------------------------
Because the original taps of the canisters were partially leaking and water has to be stored for a longer period of time, I decided to remix a print downloaded from Thingiverse: https://www.thingiverse.com/thing:5169637 from Boris_V
The original was adapted in size/diameter and trimmed in height. A sealing washer was also created to ensure watertightness.
Had tried different PLA variations, occasionally supports for the cap are recommended.
Printer: Prusa MKS3+
Rafts: No
Supports: No / auto
Resolution: cup 0.15, seal 0.2
Infill: Cup 100% / seal 25%
Filament brand: lid Verbatim PLA / seal 3DFils TPU 85a
Filament color: green / yellow
See also: https://www.printables.com/model/1247949-campingaz-cap-replacement-campingaz-verschlusskapp and
https://www.printables.com/model/1247995-campingaz-canister-spout-v1a und der Duschkopf