Nut Slotting File Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Handle for (Guitar) Nut Slotting Files of other thin flat files
- Rating
- 3 / 5
- Likes
- 18
- Downloads
- 111
- Makes
- 0
- Views
- 680
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
I designed these to fit everyone's favourite American luthiers tool supplier's gauged slotting files, I'm sure they will fit others. Use a single handle per file or use both sides. Its 3d printed you can make as many as you like for the same effort as 1.
There is a wide slot and a narrow slot so choose the side that works best.
Critical - Print with either 0.1mm layers with variable layer height that will allow a mm 0.1mm layer, this is critical as one side has a 0.1mm step and any more it too deep for 0.010mm files
In addition to the 2 halves you will need 3 off each
- M3 x 6 (8 also works) Button Head Machine screw
- M3 Nut
There is an optional shim piece that will fit the wider groove and help grip the thinnest files you have.