Meme Magnet - Wojak I Support the Current Thing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A timeless meme turned into a magnet. No MMU/AMS needed for multiple colors, simply pause on layers to change filament.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 47
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Summary:
A timeless meme turned into a magnet. No MMU/AMS needed for multiple colors, simply pause on layers to change filament.
Print settings:
PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill, classic wall
Magnets:
Designed for four 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x2.7. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print.
Filament changes:
Color order for filament changes: white, blue, grey, black.
If you stick with 0.2 layer heights:
- Layer 17 insert magnets
- Layer 22 change from white to blue
- Layer 24 change from blue to grey
- Layer 26 change from grey to black
*Be sure to double check your slicer for layer pauses