Lack PTFE Tube Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After switching from the not reliable filament buffer to the Auto Rewind Spool Holder…
- Rating
- 4.857 / 5
- Likes
- 143
- Downloads
- 789
- Makes
- 11
- Views
- 5,211
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After switching from the not reliable filament buffer to the Auto Rewind Spool Holder (https://www.thingiverse.com/thing:3252111) I made these Lack Mounts for the PTFE Tubes coming from the MMU2.
When using the Enclosure V2 they allow to move the spool holders back to the middle of the table and the angle will automaticall adjust when you open the table.
Print instructions
Import the stl into PrusaSlicer and use the default settings for your filament.
I printed these with the orange Prusament PETG.
Will add gcode later (have to test it again).
I used two M3x10 screws to connect the two parts and two small woodscrews to add it to the edge of the Lack table.
You'll need 5x PC4-M10.
Update
added stl with 4 mm hole for tube pass through.