1 / 3
Mini Round Hygrometer Mount for Food Container — image 1
1 / 3

Mini Round Hygrometer Mount for Food Container

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.22 – €1.49 net (excluding VAT)

For file: Round Hygrometer Mount_90dgr Tabs_0.2mm_PETG_MINI_1h22m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.35 excluding VAT (range midpoint).

Weight reported by the author
18 g
Print time reported by the author
1.36 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A mount for mini round humidity/temperature sensors that fits in airtight food container pour spouts.

Rating
0 / 5
Likes
7
Downloads
62
Makes
0
Views
474
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Using Kato's design, I developed a simple solution to fit the commonly available round mini humidity/temp sensors into the pour spout hole in the lid of a airtight food container. Interior locking tabs keep sensor from rotating. The sensor is recessed, so that it doesn't interfere with stacking. 

Humidity Sensor Used

Food Container Used

Note that other available round humidity sensors may have slightly different diameters. These mounts will fit diameters up to ~41mm (sensor body, not the front bezel). 

I have included models for sensors that have locking tabs at 30 degrees and 90 degrees (horizontal).
 
 Printing Notes:

  • Print with the largest top face on plate.
  • Use supports for inner ring. 

Tags