1 / 3
Mini Round Hygrometer Mount for Food Container — zdjęcie 1
1 / 3

Mini Round Hygrometer Mount for Food Container

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mount for mini round humidity/temperature sensors that fits in airtight food container pour spouts.

Ocena
0 / 5
Polubienia
7
Pobrania
61
Wydruki
0
Wyświetlenia
469
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Using Kato's design, I developed a simple solution to fit the commonly available round mini humidity/temp sensors into the pour spout hole in the lid of a airtight food container. Interior locking tabs keep sensor from rotating. The sensor is recessed, so that it doesn't interfere with stacking. 

Humidity Sensor Used

Food Container Used

Note that other available round humidity sensors may have slightly different diameters. These mounts will fit diameters up to ~41mm (sensor body, not the front bezel). 

I have included models for sensors that have locking tabs at 30 degrees and 90 degrees (horizontal).
 
 Printing Notes:

  • Print with the largest top face on plate.
  • Use supports for inner ring. 

Tagi