Audi A8 / S8 D2 front door tweeter adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows fitment of aftermarket tweeters in to the stock location in the front doors
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is an adapter to put aftermarket tweeters in the stock location in the D2 A8 & S8 front doors. The original, shown with the BLAM TS20HR tweeter fitted is 34.4mm (90/67ths of a freedom unit). There are also 36, 38, and 40mm versions.
The adapter itself is best in PETG or ASA, print as shown with support under the mounting ears. 4 walls, 4 top & bottom layers, 30% infill makes it a pretty stout piece.
There is also a seal ring which replicates the original's foam seal. This works on all but the 40mm version. Print this with in Ninjaflex if you want to use it, or use foam, silicone, etc. With a 40mm, or smaller versions with wider front faces you'll need to figure your own seal.