Cap-Toothbrush holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.25 – €1.53 net (excluding VAT)
For file: Cap-Toothbrush holder_0.4n_0.2mm_PETG_MK4IS_1h6m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.39 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 1.11 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Deckel für Zahnputzbecher, 4 Zahnbürsten, Durchmesser im Slicer veränderbar.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 45
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Lid for toothbrush tumbler with openings for placing 4 toothbrushes.
The lid can be adapted to the cup (diameter and height) in the slicer using the dimensions.
Measure the inside diameter of the cup and adjust the print object accordingly.
The lid diameter should be selected so that the lid does not come off the cup so easily, but still fits into the cup.
Update Ver.6
New higher lid with curves at the 4 openings
(curved toothbrushes sometimes got stuck when pulled out).
Happy print :)
---------------------------------------------------------------------------------------------------------
Deckel für Zahnputzbecher mit Öffnungen zum plazieren von 4 Zahnbürsten.
Der Deckel lässt sich im Slicer über die Abmaaße an den Becher (Durchmesser und Höhe) anpassen.
Den Innendurchmesser des Bechers ausmessen und das Druckobjekt entsprechend anpassen.
Der Deckeldurchmesser sollte so gewählt werden das der Deckel sich nicht so leicht aus dem Becher löst, aber dennoch in den Becher passen.
Update Ver.6
Neuer höherer Deckel mit Rundungen an den 4 Öffnungen
(gebogene Zahnbürsten blieben manchmal beim herrausziehen hängen).
Happy print :)