Cap-Toothbrush holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
1,25 € – 1,53 € netto (bez VAT)
Dla pliku: Cap-Toothbrush holder_0.4n_0.2mm_PETG_MK4IS_1h6m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,39 € netto (środek widełek).
- Masa podana przez autora
- 25 g
- Czas druku podany przez autora
- 1,11 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Deckel für Zahnputzbecher, 4 Zahnbürsten, Durchmesser im Slicer veränderbar.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Lid for toothbrush tumbler with openings for placing 4 toothbrushes.
The lid can be adapted to the cup (diameter and height) in the slicer using the dimensions.
Measure the inside diameter of the cup and adjust the print object accordingly.
The lid diameter should be selected so that the lid does not come off the cup so easily, but still fits into the cup.
Update Ver.6
New higher lid with curves at the 4 openings
(curved toothbrushes sometimes got stuck when pulled out).
Happy print :)
---------------------------------------------------------------------------------------------------------
Deckel für Zahnputzbecher mit Öffnungen zum plazieren von 4 Zahnbürsten.
Der Deckel lässt sich im Slicer über die Abmaaße an den Becher (Durchmesser und Höhe) anpassen.
Den Innendurchmesser des Bechers ausmessen und das Druckobjekt entsprechend anpassen.
Der Deckeldurchmesser sollte so gewählt werden das der Deckel sich nicht so leicht aus dem Becher löst, aber dennoch in den Becher passen.
Update Ver.6
Neuer höherer Deckel mit Rundungen an den 4 Öffnungen
(gebogene Zahnbürsten blieben manchmal beim herrausziehen hängen).
Happy print :)