Glue Stick Gridfinity Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.78 – €0.95 net (excluding VAT)
For file: GlueStickGridfinityBin_1x1x5_v1_52m_0.28mm_210C_PLA_ENDER3MAXNEO.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 51.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Needed a way to hold my glue sticks in my Gridfinity. Here we are.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 114
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I included a 1 and 3 stick stand.
I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion.
I printed mine at .28 with 1 wall and 15% lightning infill. They are not as “strong” but not much is put on these. It makes them print in less then 1 hour. If you need them to be stronger use another infill or more walls.