Mitsubishi Lancer AC Knob Pin
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.24 – €0.29 net (excluding VAT)
For file: lancer v1_0.4n_0.2mm_PETG_MK4IS_17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.27 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 17.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mitsubishi Lancer AC Knob Pin replacement part
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 86
- Makes
- 0
- Views
- 1,039
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Best to print with PA12-CF if the internal cable movement is stiff, PETG also works if cable moves smoothly. Printed with organic supports.
V3 groove is a little bit deeper on the gear side. there is no v2.
Both versions should work.