Trophy Truck V4 4x4 main chassis parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All the main chassis parts of the Trophy Truck V4
- Rating
- 0 / 5
- Likes
- 236
- Downloads
- 506
- Makes
- 0
- Views
- 5,696
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
https://youtu.be/aHf-W1n8ITU?si=BQhXFbC39kVWgMhv
Check out my profile for the rear axle and all the other parts.
-You will need M3 Nuts and Screws in 10, 12, 16, 20, 25, 30 and two in 55mm lenghts.
-12x18x4mm bearings. (Just buy 20 or so, you will brake some eventually and they are dirt cheap)
-MG995 sized servos
-RC remote
-120mm shocks in the back and 100mm in the front
-8x 4mm ball joints
-14x 3mm ball joints
-3300kv 540 (3652) sized brushless motor with a 12 tooth Modulus 1 gear.
UPDATE 14.10.2024:
reinforced 12T Pinion for easier printing
UPDATE: 16.10.2024:
added front lower controll arms with thighter shockmounts (6,2mm instead of 7,2mm)
UPDATE 15.12.2024:
update package 1: https://www.printables.com/model/1109100-trophy-truck-v41-update-package-1-rear-suspension