Trophy Truck V4 4x4 main chassis parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All the main chassis parts of the Trophy Truck V4
- Ocena
- 0 / 5
- Polubienia
- 235
- Pobrania
- 502
- Wydruki
- 0
- Wyświetlenia
- 5682
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
https://youtu.be/aHf-W1n8ITU?si=BQhXFbC39kVWgMhv
Check out my profile for the rear axle and all the other parts.
-You will need M3 Nuts and Screws in 10, 12, 16, 20, 25, 30 and two in 55mm lenghts.
-12x18x4mm bearings. (Just buy 20 or so, you will brake some eventually and they are dirt cheap)
-MG995 sized servos
-RC remote
-120mm shocks in the back and 100mm in the front
-8x 4mm ball joints
-14x 3mm ball joints
-3300kv 540 (3652) sized brushless motor with a 12 tooth Modulus 1 gear.
UPDATE 14.10.2024:
reinforced 12T Pinion for easier printing
UPDATE: 16.10.2024:
added front lower controll arms with thighter shockmounts (6,2mm instead of 7,2mm)
UPDATE 15.12.2024:
update package 1: https://www.printables.com/model/1109100-trophy-truck-v41-update-package-1-rear-suspension