DE Razor Blade Pack Dispenser Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dispenser tower for packs of double-edge safety razor blades
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 73
- Makes
- 1
- Views
- 1,080
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2025.04.23 - Since I have a larger printer now, I made a taller 22cm version that easily accommodates a 100-pack in 5-blade packs.
This dispenser tower for packs of double-edge safety razor blades was built from scratch, but was inspired by the one created by Rolts. I wanted them to dispense from the narrow side, I wanted an open slot so it's easy to reach in and move the packs, and I wanted to make it as tall as my Prusa Mini could print, which is 18cm tall.
I use a red extra fine tip Sharpie marker to write the date used on each razor pack, so I added a marker holder with an 11mm diameter hole on the front. I also uploaded a version without the marker holder.
A hard plastic 5-pack of Derby blades is about 53mm x 30mm x 11mm, and this tower can hold 17 of those. If you're using cardboard packs that are less tall, this could fit a couple more.
Print Settings
Rafts: No
Supports: Yes
Resolution: 200
Infill: 15
Filament: PLA
Notes:
Paint on supports for the bottom opening.
Neither the Sharpie holder now the arches at the top of the finger slots require supports.