1 / 3
Flashforge Adventurer 5M Drag Chain Clip and Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clip and adapter to attach a drag chain to the AD5M extruder head.
- Rating
- 4.667 / 5
- Likes
- 174
- Downloads
- 1,640
- Makes
- 3
- Views
- 8,981
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I modeled the the drag chain clip as seen in the instruction manual for the Flashforge Adventurer 5M DIY enclosure.
Drag chain clip
- This was designed to fit with Lauren Mills' drag chain model.
- I used a 16mm M3 screw for the drag chain clip
- As per the instructions, you need to remove the top cover of the extruder, unplug the cable and pass it through the clip.
Adapter
- The adapter is fragile, be careful when removing supports and installing
- It uses the original screws and an M3 heat set insert - check your insert sizing outer diameter as they can vary
Both models need supports.
Remember to turn off and even unplug your machine before installing upgrades.
I have limited experience 3D modeling and used TinkerCad to model these.