V0 Dragon Burner ADXL345 accelerometer brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the Dragon Burner brace on the back to hold an ADXL345 accelerometer.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 169
- Makes
- 0
- Views
- 981
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This replaces the “brace” part of the Dragon Burner toolhead (https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner) for the Voron v0.2. You can mount an ADXL345 accelerometer to it for measuring resonances. The brace needs to be replaced again after calibration, otherwise it can collide with the z screw. The mount is pretty close to the nozzle so it should result in pretty precise measurements. I tested it with the standard cowl and a Dragon SF Hotend.
BOM:
2x 10mm M3 screws for the brace
2x 6mm M3 screws for the accelerometer
2x M3 4mm heated inserts (slighty longer might also work)