IKEA Godmorgon Drawer Divider Foot/Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.30 – €0.37 net (excluding VAT)
For file: stand_0.4n_0.2mm_PLA_MINIIS_21m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.33 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 20.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement foot/stand for the dividers in IKEA Godmorgon drawers
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 43
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
I made this replacement foot/stand for the dividers in IKEA Godmorgon drawers based on the original foot (you can see comparison in the photos). To avoid supports, lay it flat on the trapezoid side in the slicer (like you see in the cover photo and in the supplied print file for Prusa Mini). Print with 3 perimeters in order to make the two bumps have nice 100% infill and give additional strength to the rest of the model.