Suzuki DR-Z 400 E Pillion Footpegs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
They're only printed so please don't carry fat pillions.
- Rating
- 0 / 5
- Likes
- 1
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Standard Digital File License
The DR-Z E model subframe annoyingly does not have mounting points for passenger footpegs. This model aims to correct that by using existing parts on the bike to mount 3D printed footpegs. No modification to the bike is required other than removing the weird panel on the left side because we need those threaded holes.
The left pegs mount directly to the tabs on subframe. They exist on my Aussie E model but please double check your bike. The right pegs use the holes in the rear brake master cylinder/reservoir guard to create new mounting points. There's a spacer if you run a CRF master cylinder but even so, it's optional.
Supports required for every file but only for the recesses that hold the nuts and bolts.
Required hardware:
- 4x M6 bolt ≥12 mm
- 2x M6 nut
Optional hardware:
- 2x M6 round head bolt ≤50 mm to reinforce the printed part
- 1x M6 bolt 40-45 mm only if using a CRF master cylinder spacer