External Fan Housing for Bosch Rexroth
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Externel 24VDC Fan Housing to cool down electronics of an Bosch Rexroth Indramat Controler
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
We had during summer time a lot off issues because of overheating.
So i designed an easy Mounting Fan Housing with 24V DC Fan. Originally that equipment is passivly cooled over Steel Housing.
Once printed the cover, I tool a heat gun slightly heat up the model and once smal printed connectors to center got melted Press Flad the Cover. Then it looks like the one on Picture.
I used:
8 x Threat Inserts M3
4 x Zylinder Pins 3 x 14mm (first glues them in case.
4 x M3 x 10mm Stainless Steel Hex Drive Flat Head Screw
4 x M3 x 25mm Stainless Steel Hex Drive Flat Head Screw
1 x Fan 50x50x25 24VDC