1 / 2
Lack enclosure left side Prusa PSU mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Left side PSU mount for the LACK enclosure
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 65
- Makes
- 0
- Views
- 638
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Left rear bottom corner replacement for the https://www.printables.com/model/3673-prusa-enclosure-v2-mmu2s to mount the PSU on the outside of the enclosure.
The mounting on the left side has the advantage that you don't need to modify any of the cables. The mains cable and the power switch can be reached from the front quite easy.
Print instructions
Just follow the original instruction
Print one corner and two brackets
Build instructions
Neede Hardware
- 2x M3 heatset inserts
- 2x 5x20 panhead screws
Assembly
The best way is to follow the original Instructions for the enclosure
For the PSU just read the PRUSA original manual carefully
- Disconnect the PSU
- Remove the wires from the Printer frame
- Remove the PSU from the printer
- Add a stabilizer to the printer frame instead of the PSU
- Mount the PSU to the corner
- Mount the PSU to the two brackets and fix the brackets to the leg