1 / 5
Bottle Holder for bicicles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bottle holder for bicicles. Modular Design if print volume in XY < 30x30. Holds 6 bottles; Modular print can hold more
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For this print you will need:
- 8 M5 nuts
- 8 M5x25 Outside Hex Bolts
- x M4x12 Countersunk Screws (x depends on modular design)
- x M4 nuts
- ~ 800g of filament
Was part of a design contest.
For the main body PLA should be fine. for the springs I recommend PETG.
For mounting on the bike frame i recommend using rubber / textile / Tape or similar.
I did not print this for myself yet, please share your experience & contact me if you have questions / suggestions.